HomeSite mapMail usSearch in site
EDS-Soft
ElectroDynamic Systems Software ScientificTM
Radiolocation Systems ResearchTM



Antenna Array


Antenna array

Complex directional antenna consists of separate near-omnidirectional antennas (radiating elements) positioned in the space and driven by high-frequency …

(from 'Glossary' of our web–site)






All Archives



For access to electronic copies of full texts please registered.




Search:


111213/ 14/ 15all pages

Tuesday, December 13, 2005 at 12:12AM

It is obtained a new way to solve the problem of calculating radiation of horn antenna arrays, which is based on using the immersion method; the system of horns is considered a transition layer, coordinating the waveguides with the empty space and characterized by the matrix transparency coefficient. When deriving the immersion equation for transparency coefficient, both the interleaving method and integral equation method are used.
 

Monday, December 12, 2005 at 12:12AM

The problem of finding: distribution of current density on an open surface, satisfying the Meixner condition in its contour, using the given directional diagram is solved. The current is found as a series that converges to L2(s) surface norm. The conditions of realizability of the diagram are examined, and methods of determining current using the given unrealizable diagram are specified.
 

Sunday, December 11, 2005 at 12:12AM

This is given the overview of the known approximate methods of calculating the scattering of electromagnetic waves by antennas, including calculating the integral and differential surfaces of dispersion; simple formulas for estimating these values are given. In addition, some results that belong to the authors of the work are stated.
 

Saturday, December 10, 2005 at 12:12AM

It is offered the method that can be used to compute the scattering of the wave on one or several perfect conductors, as well as on bodies with impedance, heterogeneous and anisotropic boundary conditions. The auxiliary sources on some surfaces, situated inside these bodies are introduced; in particular, the surfaces can be spanned into points. Using the Lorenz lemma, the Fourier coefficients for the density of real or equivalent current on the surface of the bodies are determined and then the currents themselves and the dispersed fields generated by them are found.
The example of calculations is given.
 

Friday, December 09, 2005 at 12:12AM

It is proved that when the primary incident field in a lossy medium is fixed, the power drawn by the antenna is finite. It is not necessary to limit the direction of the receiving antenna, unlike the case of a lossless medium when this is required to get a finite maximum.
The formulas for deriving the maximum received power and the optimal distribution the field on a specific surrounding area, which should be created by the antenna in the transmission mode for it to receive maximum power in the receiving mode, are given. The obtained results are illustrated using a linear wire antenna.

111213/ 14/ 15all pages

GuidesArray Circular 0.1.4

GuidesArray Circular™ allows to execute electrodynamic modeling of two-dimensional phased antenna arrays for circular waveguides, using the method of moments.


Subscribe



Modify subscription


 


Home | Products | Publications | Support | Information | Partners


 
 
EDS-Soft

© 2002-2024 | EDS-Soft
Contact Us | Legal Information | Search | Site Map

© design | Andrey Azarov